Translation from original instructions
Installation manual
23
We reserve the right to make changes without any prior notice.
UATYQ*Y1
Packaged Rooftop
4P522680-1
5.3 Installation
The units are sent from the factory already tested and they need only the electrical, aeraulic and hydraulic connections
for installation.
The only unassembled component shipped is the rain guard for units that envisage air exchange and are therefore
equipped with external air damper.
5.3.1 Fitting of rain hoods
A rain guard can be fitted on the opening for the passage of external air.
Protection is achieved with hoods; the number of elements forming the guard depends on the size of the air passage.
The guard is supplied in a separate kit for fitting by the installer.
In addition to the hoods, the kit includes a protective mesh and self-drilling screws for fixing.
Fig. 6 Rain guard
The protective mesh is to be fixed between the guard and the frame of the unit and cover the entire opening.
Use a 6 mm screwdriver with socket to fix it.
To fit correctly:
-
Rest the mesh filter against the edge of the external air opening;
-
begin fitting from the upper part of the opening;
- using the holes on each element of the guard, secure them to the frame of the unit with the self-drilling screws
provided.
- repeat this operation for all the elements of the guard.
Содержание UATYQ-AFC3Y1
Страница 2: ......
Страница 42: ......
Страница 43: ......
Страница 44: ...Copyright 2018 Daikin 4P522680 1 2018 03 UM_DKN_0001_Rooftop_EN_12 09 2018_rev02...