Daikin SUT00D4016-30, Руководство по эксплуатации

Страница: 8 / 99

PIM00413
1-2
1.2.3
General Precautions
DANGER
 Transportation, installation, piping, wiring, operations, maintenance and inspections must be conducted by
qualified personnel.
 During the above work, wear protective gear required for safe work (work clothes, safety band, helmet, safety
shoes, gloves and so on).
 Do not use this unit under conditions other than those specified in the catalog or delivery specifications.
 Please do not unauthorizedly modify this product by a customer. In addition, please do not disassemble it, unless
the maintenance described in this manual. There is a risk of electric shock, fire, injury.

Please install the whole system safety device, such as emergency brake, to prevent damaging the machinery or
equipment in case that the product failures.
 Please do not operate it in an atmosphere with rubber corrosion or cutting oil directly exposed locations. In
addition, please do not use near the combustible materials.
 Please do not operate or install this product if this product lost parts or damaged.
 Do not use the product which is not listed in the specifications of this manual. There is a risk of electric shock, fire,
injury.
CAUTION
 Be sure to conduct daily inspections (described in this manual or attached documents).
 Do not apply external force to this unit. (Do not step on, or pound on this unit.) Otherwise, you may suffer from
injury, or the unit may be damaged.
1.3
Precautions for Use
（
1
）
In this hydraulic unit, the motor pump unit is equipped with vibration suppressing rubber to prevent
vibration of the motor pump unit from being conveyed to the whole unit. For this purpose, the discharge
pipe provides a large degree of freedom. Therefore, when connecting the discharge pipe, be careful that the
discharge pipe will not touch the cover even if the pipe shakes with reaction force of the hose.
The piping to the unit should be connected with a hose, so that vibration of the motor pump unit will not be
conveyed to the machine.
（
2
）
This hydraulic unit is equipped with an AC fan for cooling of hydraulic oil and motor.
To ensure spaces for air intake and exhaust, do not place an obstacle at 10 cm or shorter distance from the
fan motor air intake and exhaust planes.
（
3
）
Frequently turning ON/OFF the power supply causes the controller service life to be remarkably shortened.
If you start and stop the hydraulic unit repeatedly by turning ON/OFF the power supply at intervals of 8
minutes or less, use the “start/stop” function using the start/stop signal.
（ 4 ） If you use this product in a hydraulic circuit fitted with in-line check valve on the pump discharge side, it
will not be able to control the pressure reducing of the load side. In addition, if the hydraulic circuit has
accumulators, please use check valve to prevent reverse flow to the pump side from the accumulator circuit.
When the power supply is turned OFF, because of the reverse flow, the motor will become a generator
which may damage the controller.
If load is applied to the pump when the power is turned on, there is a possibility that the motor does not
start properly. Please do not apply load to the pump for 5 seconds from power-on.
（ 5 ） This hydraulic unit uses an IPM motor, which generates counter-electromotive force during changeover
(regenerative operation). If the motor is frequently turned ON/OFF in the operating condition that easily
generate counter-electromotive force (a large load volume causes a large load reaction force accordingly),
it causes regenerative overload, resulting in unit stop.
（
6
）
This hydraulic unit is equipped with a safety valve.This safety valve has been set to a specified pressure
before shipment. However, the set pressure of the safety valve may decrease while the machine is
repeatedly used for a long period, or due to contaminants in the hydraulic oil.