Daikin SUT00D4016-30, Руководство по эксплуатации

Страница: 41 / 99

PIM00413
7-3
WARNING
 If the intake / exhaust space above can not be ensured, the heat exchange efficience of the oil cooler / AC
fan will be reduced. There is a risk of burns because the hydraulic oil and equipment will become
extremely hot.
So, please keep the intake / exhaust space as shown in the figure above.
 If you accidentally touch the hot parts, you may get burns.
7.2.2
Fixation of the unit
Please install the hydraulic unit on a horizontal table or floor which is not affected by vibration of the master
machine.
About installing methods, and installing location, please check delivery specifications (model drawing).
During transportation, in order to prevent the anti-vibration rubber of the motor pump from being damaged, the
fixing wing bolt is installed.
Please remove the fixing wing bolt in operation. If it is not removed, the unusual noise and vibration will be caused.
But during transportation, please fix the pump motor by the wing bolt for protection of the anti-vibration rubber.
■Motor Pump Type (SUT00) ■Unit Type (SUT06,SUT10)
Fixing wing bolt for transportation
(M8 × 30)
Fixing wing bolt for transportation
(M8 × 20)
WARNING
●
Unless the hydraulic unit is fastened , it may be turned over or moved by reaction force under the oil
pressure in the pipe. Be sure to fasten this unit bay bolts.
CAUTION
● If the hydraulic unit is installed on an inclined plane, oil leak or air intrusion occurs, resulting in abnormal
sound or shortened service life of the equipment. Be sure to install the unit on a level plane.
CAUTION
 If the intake / exhaust space above can not be ensured, the motor or controller will become hot, and the life
of the equipment will be reduced significantly. Please keep the intake / exhaust space as shown in the
figure above.
 If the intake / exhaust space above can not be ensured, the motor or controller will become hot, and the
temperature protection function will be activated to make it shutdown.
 If you continue using it in the high temperature state, the life of other electrical components and hydraulic
equipments such as valves and pumps will be reduced, and the malfuntion will occur.