Daikin SUPER MULTI NX FDXS09LVJU, Инженерные данные

Страница: 137 / 206

Operation Manual EDUS091128
136 Split Type Air Conditioners FTXS-L / FDXS-L Series
ECONO Operation
ECONO operation is a function which enables effi cient operation by limiting the
maximum power consumption value.
This function is useful for cases in which attention should be paid to ensure a
circuit breaker will not trip when the product runs alongside other appliances.
To start ECONO operation
„
Press during operation.
“ • ” is displayed on the LCD.
To cancel ECONO operation
„
Press again.
“ • ” is no longer displayed on the LCD.
[Example]
Normal operation ECONO operation
In case the air conditioner and other •
appliances which require high power
consumption are used at same time, a circuit
breaker may trip if the air conditioner operate
with its maximum capacity.
The maximum power consumption of the air •
conditioner is limited by using ECONO operation.
The circuit breaker is unlikely to trip even if the
air conditioner and other appliances are used at
same time.
Time
Maximum during
normal operation
Maximum during
ECONO operation
Normal
operation
ECONO
operation
From start up until set temperature is reached
Running current and
power consumption
This diagram is a representation for illustrative •
purposes only.
The maximum running current and power
consumption of the air conditioner in ECONO
operation vary with the connecting outdoor
unit.
NOTE
Notes on ECONO operation
„
ECONO operation can only be set when the unit is running. Pressing • causes the settings to be canceled, and “ ” is no longer displayed
on the LCD.
ECONO operation functions in AUTO, COOL, DRY, and HEAT operation. •
POWERFUL and ECONO operation cannot be used at the same time. •
Priority is given to the function of whichever button is pressed last.
If the level of power consumption is already low, ECONO operation will not drop the power consumption. •