Daikin RZQ20KCVJK, Руководство по установке, Страница: 12 / 64

11 English
• After punching the knock hole, the application of repair-type paint on the surface around the edge sections
is recommended to prevent rust.
Installation procedure of a central drain plug
1.
Insert drain receiver (3) onto drain socket (1) and drain cap (2) beyond 4 projections around drain socket
and drain cap.
2. Insert drain socket and drain caps into their matching drain hole; Drain socket (1) into drain hole B and
drain caps (2) into drain hole C and D. After insertion, turn them about 40° clockwise.
NOTE
• Please check whether drain receiver (3) is caught in four projections of drain socket (1) and drain cap (2)
correctly.
It will become the cause of the leak they are not attached correctly.
3. Connect vinyl hose on the market (internal diameter of 25mm) to drain socket (1).
(If the house is too long and hangs down, fix it carefully to prevent the kinks.)
4.
Affix seal (4) to part A as shown on the above drawing.
5. Please check whether there is any leak from A - D each portion.
Diagram of lower surface (Units : mm)
Air outlet side
612
140 140
47
117
219
28
9
30
620
350
(345 – 355)
Drain hole
421
Drill
Area around knockout hole
Knockout hole
Projections
Projections
Drain socket (1) Drain cap (2)
Drain receiver (3)
A
B
C
D
(Be sure not to insert them
into wrong drain holse, or
there causes water leakage.)
(View from bottom)
Seal (4)
Projection
(4 places) Projection
(4 places)
01_EN_3P281953-1B.fm Page 11 Tu esday, January 25, 2011 3:35 PM