.
.
KA RoCon G1 008.15 326 44_00 082013
2/4
RoCon G1 Gateway
Intended use
Scope of delivery
Gateway connections
The installation of RoCon G1 Gateway must always be carried out by professional staff
who are trained in the installation and commissioning of electrical devices.
Only operate the device in interior spaces and avoid the influence of humidity, dust as
well as insolation and heat radiation. Any other use which is not described in this
installation manual is not an intended use and leads to the exclusion of warranty and
liability. This also applies to conversions and alterations. The device is exclusively
intended for private use.
RoCon G1 Gateway
Central Control Unit
Power supply unit Gateway
Mains cable
Documentation
5V
Mains cable RoCon control
Brief installation guide
15 70 56
Assembly and commissioning
RoCon G1 Gateway can be mounted to the wall or
operating in an upright position. For wall mounting use the
corresponding holding brackets on the casing.
1 Connection of power supply unit
2 LAN network Connection
3 bus connection for RoCon control
4 Status LED
1
2
3
4
Picture 1: Connections RoCon G1
Picture 2: Wall mounting
50 mm
