Si211311E
Procedure to Remove Electrical Parts Box
Removal Procedure
7
3) Remove the outdoor
air thermistor.
2
Disconnect the motor
operated valve coil, and
crank case heater
connectors from the
PCB.
Note :
If not dismounting the rear/side
casing, remove the 2 screws of
the El. compo. box.
3
Remove the El. compo.
box installation screw.
4
Remove the El. compo.
box by pulling it toward
yourself and lifting.
Caution
Be careful of the lead wire
protruding from the rear surface
of the El. compo. box.
Step
Procedure
Points