Procedure to Remove Electrical Parts Box
Si211311E
6
Removal Procedure
4. Procedure to Remove Electrical Parts Box
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
∗
Remove the top plate, front
casing and side casing
according the procedure for
removing the external
casing, etc.
<In case of cooling only model>
<In the case of heat pump units>
If the lead wire is clamped by
the piping, etc., remove the
clamp.
1
Remove the discharge
pipe, heat exchanger
and air thermistor. (If
not removing,
disconnect the
connector from the
PCB.)
1) Remove the
discharge pipe
thermistor.
2) Remove the heat
exchanger thermistor.
Thermistor installation spring
Thermistor
Thermistor installation spring
Pull up the
thermistor to
remove.
Stopper