Read before Operation
Name of Parts
■
Indoor Unit
1
2
3
4
5
_I--=_�
C-1�:�-
10
9
8
-------
7
------...
[3�11
I -,�---12
©n
�---13
ON/OFF
Q
14
■
Outdoor Unit
21
20
�
::
��18
I
6
�
=-
--"----19
Appearance of the indoor/outdoor unit may
differ between different models.
* Features available with selected models
1. Front panel
2.Air inlet
3.Air filter
4.Accessory filter*
5. Model name plate
6. Indoor temperature sensor:
D
• Detects the air temperature around the unit.
7.Display
8. Air outlet
9. Louvres (vertical blades):
• The louvres are inside of the air outlet.
10. Flaps {horizontal blades)
11. Signal receiver:
• Receives signals from the remote controller.
• When the unit receives a signal, you will
hear a beep sound.
Case
Sound type
Operation start
beep-beep
Settings changed
Operation stop
12.OPERATION lamp (green)
13. TIMER lamp (orange)
14.lndoor unit ON/OFF switch:
beep
long beep
• Press this switch once to start operation.
Press once again to stop it.
• For the operation mode setting, refer to
the following table.
Mode Temperature Airflow rate
setting
COOL
22
°
c
AUTO
• This switch can be used when the remote
controller is missing.
15.Air inlet {back and side)
16. Refrigerant pipes and inter-unit wire
17. Drain hose
18. Earth terminal (inside)
19. Model name plate
20. Air outlet
21. Outdoor temperature sensor (back)
2