Operation
LED BRIGHTNESS Control Operation
The brightness of the indicator lamp can be adjusted H(high), L(low), or OFF.
To set the brightness setting mode.
■
Press(<:�sw,NaJ for more than 5 second's.
•
L d
is displayed on the LCD of remote.
■
Press
G
will show the last memory setting of brightness intensity of indicator lamp.
■
Again Press
G
to adjust the brightness to the indicator lamp.
rn��
[
H
H
(Ji:)
L
L (IL�
)
OFF
lF:
J
■ Press (<:@sw1Na)for about or more than 5 second's again to exit from the brightness setting mode or when the
remote controller is left untouched for 60 second's, it returns to the normal mode automatically.
DEW CLEAN Operation
This Function helps to clean accumulation of Dust & Stain on indoor Heat Exchanger.
■
To use
DEW CLEAN
operation, Remote Controller and Machine should be in
ON
operation and follow the
below steps.
■
Press
DEW CLEAN "CTI"
for more than 2 second's and release the button then
"C"
blinks on the remote
LCD
4 times and then it disappears.
■
The
LED
indicator lamp (green and orange) on the Indoor Unit"
\;i
"will blink together during the operation.
■
The operation stops automatically as per below defined process and unit will be switched OFF after completion.
About 65 minutes
About 30 minutes
End
Once
press
Approx. 95 minutes
Dew Clean
Dew Cleaning mode
(Unit will
(1 hours 35 minutes)
button
Dry mode
OFF)
(Cooling operation)
To cancel DEW CLEAN operation
-Turn OFF the machine from Remote Controller /Wi-Fi Control
NOTE
■
Note on LED Brightness Control :
• "Ld" indicates the brightness light feature which appears on the set temperature area.
• Remote will be in High Brightness Intensity by default, whenever batteries are inserted.
• If user sets LED lights in "OFF" state while using Brightness Control Feature and power supply failure occurs,
LED will remain in "OFF" state when power supply will resume. One needs to reset LED Brightness Control again.
■
Note on DEW CLEAN operation :
• During DEW CLEAN operation, except Streamer other functions of Remote will not work.
• Automatically controls temperature and airflow rate, so manual adjustment of these function is unavailable.
• If Mains Power Reset or Power failure occur, Dew Clean Operation
will
stop.
• User is recommended to avoid staying inside the room during Dew Clean operation as Indoor temperature
will
be lower.
• If room temperature is lower than minimum remote temperature setting then this function
will
not work.
• Recommended temperature range to operate this function is more than 24
°
C.
• Recommended to use this function once in a month to get better cooling effect.
• Do not keep LED lights in "OFF" state (using Brightness control feature) before starting Dew Clean Operation, otherwise
light will not blink during the operation making it difficult to identify the Dew Clean mode.
• This function is available in both COOL and DRY Mode of operation.
10