Daikin MT 180, Руководство по установке и обслуживанию

Страница: 9 / 18

Daikin
IM 1019 9
Operation
Setting the Clock & Day
1 Press PROGRAM once.
2 Press
▲
or
▼
to scroll until “CLOCK” is blinking. To
select, press PROGRAM once.
3 Press
▲
or
▼
to scroll through “24Hr”, “AM”, “PM”
options. “24Hr” sets your thermostat to a 24-hour clock.
“AM” and “PM” sets your thermostat to a 12-hour clock.
To select your preference, press PROGRAM once.
4 Press
▲
or
▼
to scroll to the current hour. To select, press
PROGRAM once.
5 Press
▲
or
▼
to scroll to the current minute. To select,
press PROGRAM once.
6 Press
▲
or
▼
to scroll to the current day. To select, press
PROGRAM once.
Your selections have been saved and you have exited program
mode. Your thermostat is ready to function with the factory
preprogrammed ENERGY STAR
® program. If you want to
change the program for your particular needs, follow the
instructions in the “Programming Your Thermostat” section.
Setting the Temperature Display
1 Press PROGRAM once.
2 Press
▲
or
▼
to scroll until “°F °C” is blinking. To select,
press PROGRAM once.
3 Both “°F” and “°C” will be lit, but only one will be
blinking. Press
▲
or
▼
to scroll so that the preferred
option is blinking. To select, press PROGRAM once.
Your selection has been saved and you have exited program
mode.
Programming Time & Temperature Settings
Your thermostat’s programming feature allows you to divide
up a 24-hour day into four time periods (referred to as “Wake”,
“Day”, “Evening”, and “Sleep”), and give each time period its
own setpoint temperatures. Your “Heat Setpoint temperature”
tells your heating system the room temperature to maintain
during cold weather. The “Cool Setpoint Temperature” tells
your cooling system the room temperature to maintain during
hot weather.
Factory Program: Your thermostat comes from the factory
preprogrammed with all seven days of the week set to the
times and temperatures shown in
Table 15 .
If the factory program meets your needs, simply follow the
“Setting the Clock & Day” instructions and you’re done. If
you want to change the preprogrammed times and/or
temperatures, follow the instructions under “Custom
Program”.
Custom Program
Begin by planning your program. Use the “Custom Program
Worksheet” to plan your program time periods and
temperatures you want during each period. You must program
four periods for each day. Fill in the complete table, as it will
serve as a record of your programs, then follow this procedure:
1 Press PROGRAM once.
2 Press
▲
or
▼
to scroll until “SET” is blinking. To select,
press PROGRAM once.
3 Press
▲
or
▼
to scroll to the day or group of days you
want to program. To select your preference, press
PROGRAM once.
Day / Group of Days options are:
• To program each day individually, the abbreviations
are: “M” is Monday, “TU” is Tuesday, “W” is
Wednesday, “TH” is Thursday, “F” is Friday, “SA” is
Saturday, and “SU” is Sunday.
• “MTUWTHFSASU” allows you to give all 7 days of
the week the identical heating & cooling program.
• “MTUWTHF” allows you to give all 5 weekdays the
identical heating & cooling program.
• “SASU” allows you to give both weekend days the
identical heating & cooling program.
• “DFLT” restores all seven days of the week to the
original factory preprogrammed ENERGY STAR
program.
4
Press
▲
or
▼
to scroll through the four time periods. To
select your preference, press PROGRAM once.
5
Press
▲
or
▼
to scroll to the desired starting hour. To
select, press PROGRAM once.
6
Press
▲
or
▼
to scroll to the desired starting minute. To
select, press PROGRAM once.
7
Press
▲
or
▼
to scroll to the desired HEAT setpoint
temperature. To select, press PROGRAM once.
8
Press
▲
or
▼
to scroll to the desired COOL setpoint
temperature. To select, press PROGRAM once.
Table 15: Factory Set-Up of Time & Temperature Settings
Time
Period
Start Time
Heat Setpoint
Temperature
Cool Setpoint
Temperature
Wake 6:00 am 70° F (21.0° C) 78° F (25.5° C)
Day 8:00 am 62° F (16.5° C) 85° F (29.5° C)
Evening 6:00 pm 70° F (21.0° C) 78° F (25.5° C)
Sleep 10:00 pm 62° F (16.5° C) 72° F (22.0° C)