29
ED 15121
Clear Alarms - Network
Keypad Menu Path
No Keypad Equivalent
This read/write holding register clears all active alarms. Many alarms are automatically clear. Of the alarms that need to
be manually cleared, only those listed below can be cleared from the network:
•
UNIT SHUTDOWN - Evaporator Water Flow Loss
•
UNIT SHUTDOWN–Evaporator Leaving Water Temp Low (Freeze)
•
CIRCUIT SHUTDOWN – Evaporator 1 Freeze Protection
•
CIRCUIT SHUTDOWN – Evaporator 2 Freeze Protection
The default is Null, which will cause Normal to be used provided nothing else is writing to this point. This register is
ignored by the unit controller if Chiller Local/Remote is set to Local.
Data Type
Holding Register
Measurement Units
Valid
Range
RW Holding Register
10
NA N/A
0=Normal
1=Clear Alarm
2=Null
Active Alarms
Tables 12-14 show the registers needed to read each individual alarm, the alarm index, and the alarm code.
Table 12. Modbus Warning Alarms
Warning Alarms
Alarm Class Monitoring
Alarm Index
(Holding
Register 28)
Alarm Code
(Holding
Register 31)
Individual Alarm Monitoring
Holding Registers
(0=Normal, 1=Alarm)
Alarm Description
5
1281
369
Evaporator pump maintenance
1829
371
Compressor #1 maintenance
1861 373
Compressor
#2
maintenance
1893 375
Compressor
#3
maintenance
7
1925 376
Compressor
#4
maintenance
8
2049
377
Bad setpoint override input
9
2305
378
Bad demand limit input
11 2817
740 Unit
Power
Restore
3105
741
Circuit Failed Pumpdown - Circuit #1
3137
742
Circuit Failed Pumpdown - Circuit #2
3169
743
Circuit Failed Pumpdown - Circuit #3
12
3201
744
Circuit Failed Pumpdown - Circuit #4
13 3329
745 External
Event