30
English
About the Indicator Lamps
Troubleshooting
Operating/Indicator panel
Check the indicator lamps and respond as indicated below.
Indicator lamp
Cause/Solution
Streamer lamp
The lamp blinks
This lamp blinks if the deodorising filter unit has become detached or is not properly attached.
¼
Attach the deodorising filter unit properly.
►
Page 28
HUM monitor lamp
All 5 lamps
blink at the same time
An electrical component is faulty.
¼
Contact the place of purchase.
AUTO FAN MODE lamp
The lamp blinks
Humidity lamp
All 3 lamps
blink at the same time
The temperature sensor or the humidity sensor is faulty.
¼
Contact the place of purchase.
FAN lamp
All 4 lamps
blink at the same time
Are the pre-filter, outflow grille, dust
collection filter, humidifying filter unit,
humidifying tray, and water tank
attached?
These lamps may blink if the unit is
operated without a part attached.
If all the parts are attached
An electrical component is faulty.
¼
Contact the place of purchase.
If one or more parts are not attached
Unplug the power supply, re-attach the parts and then
turn the unit on again.
Is there a buildup of dust on the
pre-filter?
If there is no dust buildup
An electrical component is faulty.
¼
Contact the place of purchase.
If there is dust buildup
Unplug the power supply, clean the pre-filter and then
turn the unit on again.
►
Page 23
Is the air outlet blocked?
If the air outlet is not blocked
An electrical component is faulty.
¼
Contact the place of purchase.
If the air outlet is blocked
Remove any obstacles blocking the air outlet and then
turn the unit on again.
These lamps may blink if there is a sudden voltage fluctuation.
►
Page 33
01_EN_3P595628-1.indd 30
2019/12/13 15:57:12
