Daikin MC704VM, Руководство по эксплуатации

Страница: 8 / 14

7
/ English
How to Operate
1 When operating
Press the [ON/OFF] button.
Pressing again will stop.
2 When you want to automatically switch the airflow rate
Press the “ ” [AUTO] button.
• Automatically adjusts the airflow rate to “ ” LL (Quiet),
“ ” L (Low), “ ” M (Standard), “ ” H (high) in response to the
dirty condition of the air.
3 When you want to manually switch the airflow rate
Press the “ ” [FANSPEED] button.
• Each time it is pressed the airflow rate switches as shown below
allowing you to choose your desired flow.
• The setting “ ” LL (Quiet) is a very slow airflow rate and is con-
venient when sleeping.
4 When you want to quickly clean the air
Press the “ ” [TURBO] button.
Pressing again will cancel.
• A high airflow rate will quickly remove any dirtiness in the air.
• This is convenient to use when cleaning.
5 When you want to remove pollen
Press the “ ” [ANTI-POLLEN] button.
Pressing again will cancel.
• Switching the airflow speed every 5 minutes between
“ ” M (Standard) and “ ” L (Low) will catch pollen before they
fall on the floor.
6 When you expel negative ions
Press the “ ” [RELAX] button.
Pressing again will cancel.
• Generates negative ions.
7 When you want to decide a time to stop operation
Press the “ ” [OFF TIMER] button.
• Each time it is pressed the timer setting switches as shown below.
The remaining time will be lit in the “OFF timer setting indicator”.
• When the set time is reached, the operation will automatically
stop.
• The set time can be changed if the button is pressed while the
timer is operating.
8 When you want to change the brightness of the photo
operation lamp and clean monitors
Press the “ ” [BRIGHTNESS] button.
• Each time it is pressed, the display will switch as shown below.
• Only set to OFF when you are concerned about light coming from
the main unit such as when sleeping. The photo operation will
stop simultaneous with the display going Off so if it is always Off,
the odor removal and anti-bacterial performance will drop
9 When you want to prevent incorrect operation
Press the “ ” [LOCK] button.
Pressing again will cancel.
• Stops the function of the button other than the “ ” [LOCK]
button on the main unit and buttons on the remote controller.
• This makes it possible to prevent children from operating the unit
incorrectly.
• When you want to release the child lock settings and the remote
controller is not in your hand, remove the power plug once and
then reinsert it and operate the unit.
■
■ ■
■
When you want to operate the unit using
the button on the main unit
When the remote controller is not in your hand, you can use the
“ ” [Operation Switch / Stop] button on the main unit without using the
remote controller. (Page 4)
NOTE
• Even if the ON/OFF button of the remote controller is pressed within
2 seconds right after setting the front panel and plasma ionizer or
inserting the power plug, the unit will not operate.
• When an incorrect operation is performed during operation
If lightning or a radio signal cause an error indication to display in
the main unit display and the remote controller becomes inoperable,
remove the power plug once and then reinsert it and operate the
unit
1
3
5
6
8
9
2
4
7
LL (Quiet)
“ ”
L (Low)
M (Standard)
“ ” “ ”
H (High)
“ ”
“ 1 ” (1 hour) “ 2 ” (2 hour) “ 4 ” (4 hour) (Cancel)
(Dark) (Off) (Standard)
01_EN_3P068886-5G.fm Page 7 Wednesday, December 4, 2002 2:34 PM