background image

6

English

1

 About the streamer lamp

• This lamp lights up when the streamer is operating. The streamer operates depending on the degree of air impurity.

2

 About the dust sensor lamp / PM2.5 INDICATOR lamp

After operation is started, the lamp will light green for the fi rst minute
(approx.) regardless of air impurity level.

The responsiveness of the dust/PM2.5 sensor may be poor during FAN setting

“Turbo” or when airfl ow is high in AUTO FAN MODE. The strong airfl ow causes dust
to be drawn into the air inlets before it can be detected by the dust/PM2.5 sensor. 

This is normal (not a malfunction).

If the responsiveness of the dust/PM2.5 sensor is poor, change the sensitivity
setting of the sensor. 

 

Page 12

Dust/PM2.5 sensor detection range

Detectable matter

house dust, tobacco smoke, pollen, mites, pet hairs, 
diesel particulate matter

Sometimes detectable

steam, oil smoke

3

 About the odour sensor lamp

If operation is started immediately after the power supply plug is inserted, the
lamp will light green for the fi rst minute (approx.).

If odour intensity levels are unchanging, the sensor may not respond even if there
is a strong odour in the air.

• The sensor may not respond to some odours such as pet odours (excluding

ammonia), garlic odour, etc.

As odour perception varies by person, in some cases an odour may be sensed

even when the lamp is green.
If the odour bothers you, switch to manual airfl ow rate, and select a high airfl ow

rate. 

 

Page 9

The ambient odour level in the fi rst minute after the unit is plugged in serves as
the reference level upon which the sensitivity of the odour sensor is determined. 
Insert the power supply plug when the air is clean (odour-free).

Odour sensor detection range

Detectable matter

tobacco odours, cooking odours, pet odours, toilet 

smells, waste smells, mould odours, sprays, alcohol

Sometimes detectable

sudden changes in temperature/humidity, steam, oil 
smoke, gas emitted from combustion-based heating 
devices

Read First

Operating/Indicator panel

When a lamp is blinking

 

 

Page 17

MODE lamps [green]

Indicate the MODE in operation.

ON/OFF lamp [green]

Lamp will light up when the power is ON.

FAN lamps [green]

Indicates the active FAN setting (4 settings: Quiet, Low, Standard, 

Turbo).

2

 

Dust sensor lamp / PM2.5 INDICATOR lamp 

Light indicates the volume of ambient dust.

Green indicates that the air is clean.

• The dust sensor lamp / PM2.5 INDICATOR lamp can detect small (approx. 1.0-2.5μm) and

large (approx. 2.5μm and above) dust particles. The PM2.5 INDICATOR lamp light in

response to small particles and the dust lamp lights in response to large dust particles.

Green

Orange

Red

Low

High

Lamp 

colour

Dust

[Dust sensor lamp]

Low

High

Green

Green

Lit up

Yellow

Orange

Red

Purple

Brown

Dust

[PM2.5 INDICATOR lamp]

1

 

Streamer lamp [blue]

Lights up when the streamer is active

The streamer turns ON and OFF
automatically depending on the
degree of air impurity and FAN setting.

• Turns off when the streamer is

inactive.

3

 Odour sensor lamp

Indicates the intensity of odours in 3 
colours: green, orange, red.

Green indicates that the air is clean.

Green

Orange

Red

Low

High

Lamp 

colour

Odours

01_EN_3P484757-1D.indd   6

10/1/2018   11:37:09 AM

Содержание MC40YPVM

























Отзывы: