background image

IM 1093-1 (02/15) 

©2015 Daikin Applied   |   (800) 432–1342   |   www.DaikinApplied.com

Daikin Applied Training and Development

Now that you have made an investment in modern, efficient Daikin equipment, its care should be a high 

priority. For training information on all Daikin HVAC products, please visit us at www.DaikinApplied.com 

and click on Training, or call 540-248-9646 and ask for the Training Department.

Warranty

All Daikin equipment is sold pursuant to its standard terms and conditions of sale, including Limited 

Product Warranty. Consult your local Daikin Applied representative for warranty details. To find your 

local Daikin Applied representative, go to www.DaikinApplied.com.

Aftermarket Services

To  find  your  local  parts  office,  visit  www.DaikinApplied.com  or  call  800-37PARTS  (800-377-2787). 

 

To find your local service office, visit www.DaikinApplied.com or call 800-432-1342.

This document contains the most current product information as of this printing. For the most up-to-date 

product information, please go to www.DaikinApplied.com.

Products manufactured in an ISO Certified Facility.

Содержание IM 1093











Отзывы: