Installation and operation manual
11
FXZQ15~50A2VEB
VRV System air conditioners
4P341102-1B – 2013.06
Wiring diagram
Indoor unit
A1P ..................... Printed circuit board
C105.................... Capacitor (M1F)
F1U ..................... Fuse (T, 3.15 A, 250 V)
HAP..................... Flashing lamp (service monitor green)
M1F ..................... Fan motor
M1P..................... Drain pump motor
M1S~M4S ........... Swing motor
R1T ..................... Thermistor (air)
R2T,R3T .............. Thermistor (coil)
S1L...................... Float switch
V1R ..................... Diode bridge
X1M..................... Terminal block
X2M..................... Terminal block
Y1E ..................... Electronic expansion valve
Z1F...................... Noise filter
Z1C ..................... Ferrite core
Z2C ..................... Ferrite core
Z3C ..................... Ferrite core
PS ....................... Switching power supply
Wireless remote controller (receiver/display unit)
A2P...................... Printed circuit board
A3P...................... Printed circuit board
BS1...................... Push button switch on PCB
H1P ..................... Pilot lamp (on-red)
H2P ..................... Pilot lamp (timer-green)
H3P ..................... Pilot lamp (filter sign-green)
H4P ..................... Pilot lamp (defrost-orange)
SS1...................... Selector switch (main/sub)
SS2...................... Selector switch (wireless address set)
Sensor kit
A4P...................... Printed circuit board
A5P...................... Printed circuit board
Wired remote controller
R4T...................... Thermistor (air)
Connector for optional parts
X24A.................... Connector (wiring remote controller)
X33A.................... Connector (adaptor for wiring)
X35A.................... Connector (power supply for adaptor)
X81A.................... Connector (sensor kit)
Connector for optional parts
F2U...................... Fuse
Q1DI .................... Earth leak detector
Notes
1
: Terminal block
: Connector
: Field wiring
2
In case of using a central remote controller, connect it to the unit in accordance with the supplied installation manual.
3
X2A, X8A, X24A, X33A, X35A, X36A and X38A are connected when the optional accessories are being used.
In case of using a self cleaning decoration panel, see the wiring diagram of the self cleaning decoration panel.
4
In case of main/sub change-over, see the installation manual supplied with the remote controller.
5
Colour legend
BLK
: Black
BLU
: Blue
ORG
: Orange
YLW
: Yellow
PNK
: Pink
RED
: Red
WHT
: White
GRN
: Green
BRN
: Brown
GRY
: Gray
6
Applicable only in case of protected pipes. Use H07RN-F in case of no protection.
7
When connecting the input wires from outside, FORCED OFF or ON/OFF CONTROL operation can be selected by the remote controller. See installation
manual for more details.
Control box
: Control box
Receiver/display unit
: Receiver/display unit
Central remote controller
: Central remote controller
Wired remote controller
: Wired remote controller
Input from outside
: Input from outside
Sensor kit
: Sensor kit
Optional accessory
: Optional accessory
Indoor unit
: Indoor unit
Содержание FXZQ15A2VEB
Страница 16: ...4P341102 1B 2013 06 Copyright 2013 Daikin ...