background image

Table of Contents

Installation and operation manual

3

FXAA15~63AUV1B
VRV system air conditioner
3P622285-1B – 2020.10

Table of Contents

1 About the documentation

3

1.1

About this document..................................................................

3

2 Specific installer safety instructions

4

2.1

Instructions for equipment using R32 refrigerant ......................

4

2.1.1

Installation space requirements ..................................

5

For the user

5

3 User safety instructions

5

3.1

General......................................................................................

5

3.2

Instructions for safe operation ...................................................

6

4 About the system

8

4.1

System layout ............................................................................

8

5 User interface

9

6 Operation

9

6.1

Operation range ........................................................................

9

6.2

About operation modes .............................................................

9

6.2.1

Basic operation modes ...............................................

9

6.2.2

Special heating operation modes................................

9

6.2.3

Airflow direction...........................................................

9

6.3

To operate the system...............................................................

10

7 Maintenance and service

10

7.1

Precautions for maintenance and service .................................

10

7.2

Cleaning the unit .......................................................................

10

7.2.1

To clean the air outlet and exterior ............................. 10

7.2.2

To clean the front panel .............................................. 11

7.2.3

To clean the air filter ................................................... 11

7.3

About the refrigerant..................................................................

11

7.3.1

About the refrigerant leakage sensor.......................... 12

8 Troubleshooting

12

9 Relocation

13

10 Disposal

13

For the installer

13

11 About the box

13

11.1

Indoor unit .................................................................................

13

11.1.1

To remove the accessories from the indoor unit......... 13

12 Unit installation

13

12.1

Preparing the installation site ....................................................

13

12.1.1

Installation site requirements of the indoor unit .......... 13

12.2

Opening and closing the unit.....................................................

14

12.2.1

To remove the front panel........................................... 14

12.2.2

To re-install the front panel ......................................... 14

12.2.3

To remove the front grille ............................................ 14

12.2.4

To re-install the front grille .......................................... 14

12.2.5

To open the service cover........................................... 14

12.2.6

To close the service cover .......................................... 14

12.3

Mounting the indoor unit............................................................

14

12.3.1

To install the mounting plate ....................................... 14

12.3.2

To drill a wall hole ....................................................... 16

12.3.3

To remove the pipe port cover .................................... 16

12.3.4

To hook the unit on the mounting plate....................... 17

12.3.5

To pass the pipes through the wall hole ..................... 17

12.3.6

To provide drainage .................................................... 17

13 Piping installation

18

13.1

Preparing refrigerant piping ........................................................ 18

13.1.1

Refrigerant piping requirements................................... 18

13.1.2

Refrigerant piping insulation ........................................ 19

13.2

Connecting the refrigerant piping ............................................... 19

13.2.1

To connect the refrigerant piping to the indoor unit ..... 19

14 Electrical installation

19

14.1

Specifications of standard wiring components ........................... 19

14.2

To connect the electrical wiring to the indoor unit ...................... 20

15 Finishing the indoor unit installation

21

15.1

To fix the unit on the mounting plate .......................................... 21

16 Commissioning

21

16.1

Checklist before commissioning ................................................. 21

16.2

To perform a test run .................................................................. 21

17 Configuration

21

17.1

Field setting ................................................................................ 21

18 Technical data

22

18.1

Wiring diagram ........................................................................... 22

18.1.1

Unified wiring diagram legend...................................... 22

1

About the documentation

1.1

About this document

Target audience

Authorised inst end users

INFORMATION

This appliance is intended to be used by expert or trained
users  in  shops,  in  light  industry  and  on  farms,  or  for
commercial use by lay persons.

WARNING

Make  sure  installation,  servicing,  maintenance,  repair  and
applied materials follow the instructions from Daikin and, in
addition,  comply  with  applicable  legislation  and  are
performed  by  qualified  persons  only.  In  Europe  and  areas
where  IEC  standards  apply,  EN/IEC  60335-2-40  is  the
applicable standard.

Documentation set

This  document  is  part  of  a  documentation  set.  The  complete  set
consists of:

General safety precautions:

▪ Safety instructions that you must read before installing

▪ Format: Paper (in the box of the indoor unit)

Indoor unit installation and operation manual:

▪ Installation and operation instructions

▪ Format: Paper (in the box of the indoor unit)

Installer and user reference guide:

▪ Preparation of the installation, good practices, reference data,…

▪ Detailed  step-by-step  instructions  and  background  information

for basic and advanced usage

▪ Format:  Digital  files  on 

http://www.daikineurope.com/support-

and-manuals/product-information/

Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.

The original documentation is written in English. All other languages
are translations.

Содержание FXAA15AUV1B

























Отзывы: