12
Adjusting the Airflow Direction
You can adjust the airflow direction to increase your comfort.
■
To start auto swing
Press
.
• “
” is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
■
To set the flap at desired
position
• This function is effective while flap is in auto swing
mode.
Press
when the flap has reached
the desired position.
• The flap will stop moving.
• “
” disappears from the LCD.
■
To adjust the louvers (vertical
blades)
• Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-side blades.)
NOTE
Upper and lower airflow direction
■
Note on flap and louvers angle
• Unless “SWING” is selected, you should set the
flap at a near-horizontal angle in HEAT operation
and at a upward position in COOL operation to
obtain the best performance.
• During COOL operation, the range within which the
flap swings differs from the range within which the
flap can be fixed.
■
ATTENTION
• When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
COOL
HEAT
01_EN_3P257979-1A.fm Page 12 Tuesday, March 3, 2015 3:09 PM
