9
|
Finishing the indoor unit installation
Installer reference guide
41
35M5V1B_35M5V1B
Daikin room air conditioner
4P519439-13N – 2021.03
2
Pass the drain hose and refrigerant pipes through the wall hole.
9.3 To fix the unit on the mounting plate
1
Set the indoor unit on the mounting plate hooks. Use the " " marks as a
guide.
2
Press the bottom frame of the unit with both hands to set it on the bottom
hooks of the mounting plate. Make sure that the wires do NOT get squeezed
anywhere.
Note:
Take care that the interconnection cable does NOT get caught in the indoor
unit.
3
Press the bottom edge of the indoor unit with both hands until it is firmly
caught by the mounting plate hooks.
4
Secure the indoor unit to the mounting plate using 2 indoor unit fixing screws
M4×12L (accessory).
9.4 Closing the unit
9.4.1 To re-install the front grille
1
Install the front grille and firmly engage the 3 upper hooks.
2
Install 2 screws back on the front grille.
3
Install the air filter and then mount the front panel.
9.4.2 To close the service cover
1
Place the service cover to its original place on the unit.
2
Install 1 screw back on the service cover.
9.4.3 To re-install the front panel
1
Attach the front panel. Align the shafts with the slots and push them all the
way in.
2
Close the front panel slowly; press at both sides and at the centre.