Daikin FTXTA30C2V1BW, Руководство пользователя

Страница: 39 / 64

5 | Operation
User reference guide
39
FTXTA30C2V1B(W)(B)
Daikin room air conditioner
4P518786-11K – 2023.05
…lamp is blinking. Status
Timer Communication is OK
Operation and timer Communication is OFF
4 Press to exit the menu.
Result: The display will return to the default screen.
To connect the wireless LAN to your home network
The wireless adapter can be connected to your home network using the:
▪ WPS button (Wi-Fi Protected Setup) on the router (if present),
▪ The SSID (Service Set Identifier) and the KEY (password) - located on the unit.
To connect using the WPS button
1 Hold for at least 5 seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly or until the WPS setting display (menu ) appears.
3 Press to confirm the selection.
Result: “Beep” sound is heard when the unit receives signal.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
INFORMATION
If the connection with your router is not possible, try procedure "To connect using
SSID and KEY number" [ 4 39].
5 Press to exit the menu.
Result: The display will return to the default screen.
To connect using SSID and KEY number
1 Hold for at least 5 seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly or until the AP mode display (menu ) appears.
3 Press to confirm the selection.
Result: “Beep” sound is heard when the unit receives signal.
4 Connect your smart device to the access point in the same way as to a
standard wireless network.