16
INTELLIGENT EYE Operation
“INTELLIGENT EYE” is useful for energy saving
Energy saving operation
Change the temperature –3.6°F (–2°C) in heating / +3.6°F (+2°C) in cooling / +3.6°F (+2°C) in dry mode from set temperature.
•
When the room temperature exceeds 86°F (30°C), the operation changes the tempe1.8°F (+1°C) in COOL / +1.8°F (+1°C) in DRY
mode from set temperature.
Decrease the air
fl
ow rate slightly in FAN mode only.
•
If no presence detected in the room for 20 minutes.
•
NOTE
Notes on “INTELLIGENT EYE”
Application range is as follows.
•
90°
55°
23ft (7m)
55°
Vertical angle 90°
(Side view)
Horizontal angle 110°
(Top view)
23ft (7m)
Sensor may not detect moving objects further than 23ft (7m) away. (Check the application range)
•
Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
•
The sensor also mistakenly detects pets, sunlight,
fl
uttering curtains and light re
fl
ected off of mirrors as passersby.
•
INTELLIGENT EYE operation will not go on during POWERFUL operation.
•
NIGHT SET mode
•
Page 20
will not go on during use of INTELLIGENT EYE operation.
To combine “COMFORT AIRFLOW operation” and “INTELLIGENT EYE
operation”
Press
1.
and select “
” on the LCD.
Each time the
•
is pressed a different setting option is displayed on the LCD.
Blank
To cancel “COMFORT AIRFLOW operation” and “INTELLIGENT EYE
operation”
Press
2.
.
Press the button to select “Blank”.
•
The air conditioner can go into operation with the COMFORT AIRFLOW and INTELLIGENT EYE functions combined.
•
The volume of air will be set to AUTO. If the upward and downward air
fl
ow direction is selected, the COMFORT AIRFLOW operation will be
•
canceled.
Priority is given to the function of whichever button is pressed last.
CAUTION
Do not place large objects near the sensor.
•
Also keep heating units or humidi
fi
ers outside the sensor’s detection area. This sensor can detect undesirable objects.
Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
•
01_EN_3P228444-4J.indd 16
01_EN_3P228444-4J.indd 16
10/12/2011 9:34:35 AM
10/12/2011 9:34:35 AM