14
To adjust the airflow rate setting
Press
.
• Each pressing of
advances the airflow rate setting in sequence.
Auto
Indoor unit quiet
Low
Middle low
Middle
Middle high
High
• When the airflow is set to “ ”, indoor unit quiet operation will start and the noise
from the unit will become quieter.
• In indoor unit quiet operation, the airflow rate is set to a weak level.
• In DRY operation, the airflow rate setting is not variable.
NOTE
Note on the angles of the flaps
• The flaps swinging range depends on the operation mode. (See the figure.)
COOL and DRY operation
HEAT operation
FAN operation
Upper limit
COMFORT
AIRFLOW
Lower limit
Stop operation
COMFORT AIRFLOW
Stop operation
Upper limit
Lower limit
Upper limit
Lower limit Stop operation
8°
15°
45°
80°
30°
70°
8°
80°
Note on 3-D airflow
• Using 3-D airflow circulates cold air, which tends to collected at the bottom of the room, and hot air, which tends to collect near the ceiling,
throughout the room, preventing areas of cold and hot developing.
Note on airflow rate setting
• At smaller airflow rates, the cooling (heating) effect is also smaller.
CAUTION
• Always use a remote controller to adjust the angles of the flaps and louvers. If you attempt to move the flaps and louvers forcibly with hand
when they are swinging, the mechanism may be broken.
• Always use a remote controller to adjust the louvers angles. Inside the air outlet, a fan is rotating at a high speed.
01_EN_3P291209-1C.indd 14
31-Aug-20 6:29:45 PM
