19
ON TIMER Operation
To use ON TIMER operation
Check that the clock is correct.
•
If not, set the clock to the present time.
Page 10
Press
1.
.
“
” is displayed on the LCD.
“
” blinks.
“
•
” is no longer displayed on the LCD.
Press
2.
until the time setting reaches the
point you like.
Each pressing of either button increases or decreases the time setting by 10 minutes.
•
Holding down either button changes the setting rapidly.
Press
3.
again.
“
•
” and setting time are displayed on the LCD.
The TIMER lamp lights up.
•
Display
To cancel ON TIMER operation
Press
.
“
•
” and setting time are no longer displayed on the LCD.
“
•
” and day of the week are displayed on the LCD.
The TIMER lamp goes off.
•
To combine ON TIMER and OFF TIMER
A sample setting for combining the 2 timers is shown below.
•
(Example)
Present time: 23:00 (The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00
Combined
NOTE
In the following cases, set the timer again.
After a breaker has turned off.
•
After a power failure.
•
After replacing batteries in the remote controller.
•
01_EN_3P253185-1.indd 19
01_EN_3P253185-1.indd 19
9/16/2009 4:04:58 PM
9/16/2009 4:04:58 PM
