20
TIMER Operation
To use ON TIMER operation
Check that the clock is correct.
•
If not, set the clock to the present time.
Page 9
Press
1.
.
” is displayed.
” blinks.
“
“
Press
2.
until the time setting reaches the point
you like.
Every pressing of either button increases or decreases the time setting by 10 minutes. Holding
•
down either button changes the setting rapidly.
Press
3.
again.
The TIMER lamp lights up.
•
Control panel
ON
OFF
To cancel ON TIMER Operation
Press
.
The TIMER lamp goes off.
•
To combine ON TIMER and OFF TIMER
A sample setting for combining the two timers is shown below.
•
(Example)
Present time: 23:00 (The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00
Combined
ATTENTION
In the following cases, set the timer again.
After a breaker has turned OFF.
•
After a power failure.
•
After replacing batteries in the remote controller.
•
01_EN_3P232717-1C.indd 20
01_EN_3P232717-1C.indd 20
12/22/2008 2:51:37 PM
12/22/2008 2:51:37 PM
