![background image](http://html1.mh-extra.com/html/daikin/ftxa20c2v1bw/ftxa20c2v1bw_installers-reference-manual_4699299030.webp)
6
|
Unit installation
Installer reference guide
30
CTXA-C(W)(B)(S) + FTXA-C(W)(B)(S)
Daikin room air conditioner
4P518023-15P – 2023.05
▪
Drain hose extension.
To extend the drain hose, use a field supplied hose with
inner Ø16 mm. Do NOT forget to use a heat insulation tube on the indoor section
of the extension hose.
a
a
b
c
Ø16
Ø16
a
Drain hose supplied with the indoor unit
b
Heat insulation tube (field supply)
c
Extension drain hose
▪
Ridgid polyvinyl chloride pipe.
When connecting a ridgid polyvinyl chloride pipe
(nominal Ø13 mm) directly to the drain hose as with embedded piping work, use
a field supplied drain socket (nominal Ø13 mm).
a
b
c
Ø18
a
Drain hose supplied with the indoor unit
b
Drain socket with nominal Ø13 mm (field supply)
c
Ridgid polyvinyl chloride pipe (field supply)
▪
Condensation.
Take measures against condensation. Insulate the complete drain
piping in the building.
1
Insert the drain hose in the drain pipe as shown in the following figure, so it
will NOT be pulled out of the drain pipe.
≥50
mm
6.4.2 To connect the piping on right side, right-back, or right-bottom
INFORMATION
The factory default is right-side piping. For left-side piping, remove the piping from
the right side and install it on the left side.
1
Attach the drain hose with adhesive vinyl tape to the bottom of the
refrigerant pipes.
2
Wrap the drain hose and the refrigerant pipes together using insulation tape.
Содержание FTXA20C2V1BW
Страница 57: ......
Страница 58: ......
Страница 59: ......
Страница 60: ...4P518023 15P 2023 05 Copyright 2023 Daikin Verantwortung f r Energie und Umwelt...