Read before Operation
Name of Parts
■
Remote Controller
1. Signal transmitter:
• It send signals to the indoor unit.
2. Display (LCD):
• It displays the current setting.
(In this illustration, each section is
shown with its display on for the
purpose of explanation.)
3.ON/OFF button:
• Press this button once to start operation.
Press once again to stop it.
4. TEMPERATURE adjustment button:
• It changes the temperature setting.
5. FAN setting button:
• It selects the airflow rate setting.
6. SWING button:
• Adjusting the airflow direction.
7. POWER CHILL button:
POWER CHILL operation
8. MODE selector button:
• It selects the operation mode.
(DRY /COOUFAN)
9. ECONO button
10.TIMER CANCEL button:
• It cancels the timer setting.
11. ON TIMER button
12. OFF TIMER button
13.COANDA button:
COANDA operation
14. GOOD SLEEP button
NOTE
■
Notes on remote controller
7---........
8------1-H
9------1-H
fJ
r-H>----3
r=----tt----
4
+-++----5
+-++----6
13------l�
14-----tt--:------H---10
12
11
Remote
Applicable models
Features
F Series
I
G Series
Back Light
.lC
• Never expose the remote controller to direct sunlight.
3
• Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft cloth.
• Signal communication may be disabled if an electronic-starter-type fluorescent lamp
(such as inverter-type lamp) is in the room. Consult the shop if that is the case.
• If the remote controller signals happen to operate another appliance, move that appli
ance to somewhere else, or consult the shop.
.lC
