OPERATION
OPERATION
[Flow of function]
MOLD PROOF setting
MOLD PROOF operation
with streamer
Stop
Automatic stop
Automatic
start every time
To operate automaticall
y
To operate man
uall
y
Set function
during COOL
or DRY
Manual
start one time
Set function
during stop
Heat exchanger is
dried for about 60 mins.
During operation, fl
aps
open and air flows.
Heat exchanger is
dried for about 60 mins.
During operation, flaps
open and air flows.
Heat exchanger is
washed for about
60 mins.
[Note]
During operation,
cold air blows out
and the room
temperature may
drop.
Automatic stop
MOLD PROOF setting
MOLD PROOF operation with streamer
Stop
After
stop
After
stop
After
stop
NOTE
Notes on MOLD PROOF setting
• When you want to stop MOLD PROOF operation midway, press
.
• This operation dries the inside of the air conditioner while streamer discharge is performed to
reduce the development of mold and odour inside the air conditioner. But the function does not
remove any adhered dust and mold.
• MOLD PROOF operation is not available when the unit is turned off using the OFF TIMER or
turned off using a smartphone.
Notes on MOLD PROOF operation
•
The flaps may sometimes close to increase the drying effect inside the air conditioner.
• MOLD PROOF operation may not be performed if the COOL or DRY operation time is short.
• If MOLD PROOF operation does not suit your preference, set operation to “OFF”.
Page 16
Relation between MOLD PROOF operation and indoor unit lamps
Air conditioner
MOLD PROOF setting
MOLD PROOF lamp
STREAMER lamp
Operating
(OPERATION lamp lights up)
MOLD PROOF is “ON”
Lights up
Depends on
STREAMER setting
MOLD PROOF is “OFF”
Goes off
Not operating
(OPERATION lamp goes off)
MOLD PROOF is “ON”
Lights up
Lights up
17
Tiếng V
iệt
English
01_EN_3P658678-6A.indd 17
12/10/2564 15:01:48