IIJI LED/ 7 SEGMENT BRIGHTNESS
� Control Operation
. .
�
:• A ••• L___)
: TEMP :
0
•• V :
•
•
NOTE
The brightness of the indicator lamp/ 7 Segment can be adjusted H(high),
L(low), or OFF.
To set the brightness setting mode.
■
Press(caSWJNaj for more than 5 seconds.
•
L d
is displayed on the LCD.
■
Press [r@P] will show the last memory setting of brightness
intensity of indicator lamp/ 7 Segment.
■
Again Press[r@P]to adjust the brightness to the indicator lamp/ 7
Segment.
-�
L
_
d
_l
___ lldl __ llldl
H
I
� �
H (High)
L (Low)
OFF
■
Press �;Naj for more than 5 seconds again to exit from the
brightn
setting mode or when the remote controller is left
untouched for 60 seconds, it returns to the normal mode
automatically.
• "Ld" indicates for the brightness (Light) feature which is appeared on set temperature area.
• Remote will be in High Brightness Intensity by default whenever batteries inserted.
• Keep this in mind that If user sets LED lights to be in "OFF" state (using Brightness control feature) and if Power failure
occurs then when power will resume LED will remain in OFF state (needs to reset LED Brightness Control again)
21
