•
Checking the Inverter Output
and Temperature Display
The inverter output and temperature display for the indoor unit shows the current
inverter output, indoor temperature, and set temperature.
■ Checking current inverter output, indoor temperature and
set temperature when the air conditioner is in operation
DD
DD
DD
□
8
CJQ
/DISPLAY'
O.C�D
·•··········
ogo
CJ
Inverter output and
temperature display
NOTE
DISPLAY
1. Press ( i1 ) during operation.
• Each press of
'oo
cycles the display through current inverter output,
indoor temperature, and set temperature.
No display (Default)
Inverter output
Indoor temperature
Set temperature
• Inverter output serves as an estimate of power consumption. (where
rated power consumption is 100%)
• There is a" . " (dot) after the set temperature figure.
• Inverter output does not display when the unit is in FAN operation.
• Set temperature does not display when the unit is in DRY operation or
FAN operation.
• Inverter output and set temperature may not display depending on the
operation mode that is active.
• The display turns off when the unit is turned off.
■ Checking current indoor temperature when the air
conditioner is off
DISPLAY
Press C::i::) when the air conditioner is OFF and remote is ON.
The current indoor temperature displays.
Press the button again to turn off the display.
■ Note on the inverter output and temperature display
• "F.L." displays as inverter output when the rated power consumption is exceeded.
• " - - " may display for a short while after the air conditioner is turned on or at other
times.
• Inverter output may be low at times for the purposes of protecting the product.
• When the unit is operated using another device, such as a wired remote controller or
smartphone, the set temperature displayed may not match the set temperature on the
remote controller.
• An error code will display if the air conditioner fails to operate when turned on. Consult
your service centre. Refer to the error code table in
"Troubleshooting'·.
l)M\i
18
