![background image](http://html1.mh-extra.com/html/daikin/ftkm09wv2s/ftkm09wv2s_operation-manual_4703380013.webp)
OPERATION
OPERATION
Adjusting the Airflow Direction
•
You can adjust the airflow direction to increase your comfort.
ATTENTION
•
Always use a remote controller to adjust the angles of the flaps and louvres.
- If you attempt to move it forcibly with hand when it is swinging, the
mechanism may be broken.
- Inside the air outlet, a fan is rotating at a high speed.
[To operate automatically]
To adjust the flaps (horizontal blades)
Up and down airflow direction
Press
.
• “
” appears on the LCD.
To adjust the louvres (vertical blades)
Right and left airflow direction
Press
.
• “
” appears on the LCD
.
The 3-D airflow direction
Press
and
.
• “
” and “
” appear on the LCD.
•
The flaps and louvres move in turn.
•
To cancel 3-D airflow, press either
or
again.
The flaps or louvres will stop moving.
[To operate manually]
To set the flaps or louvres at the desired position
•
This function is effective while the flaps or louvres are in auto swing mode.
Press
and
when the flaps or louvres reach
the desired position.
•
In the 3-D airflow, the flaps and louvres move in turn.
• “
” or “
” disappears from the LCD.
NOTE
Note on airflow direction setting
•
The movable range of the flaps varies according to the
operation mode, refer to the right picture.
Note on 3-D airflow
•
Using 3-D airflow circulates cold air, which tends to
collect at the bottom of the room, preventing areas of
cold developing.
COOL / DRY
FAN ONLY
Movable range of the flaps
11
The louvres (vertical blades) will begin to swing.
The flaps (horizontal blades) will begin to swing.