Daikin EWAQ016BAW, Руководство по обслуживанию

Страница: 86 / 228

ESIE11-05 Field Setting from Outdoor Unit
Functional Description 75
7.4 Monitor Mode
The numbers in the "No." column represent the number of times to press the SET (BS2) button.
No. Setting item LED display Data display
H1P H2P H3P H4P H5P H6P H7P
0 Various settings
l h h h h h h
1 C/H unified address
l h h h h h k
2 Low noise/demand address
l h h h h k h
3 Not used
l h h h h k k
4 Not used
l h h h k h h
5 Number of connected hydrobox
PCB’s
l h h h k h k
6 Not used
l h h h k k h
7 Not used
l h h h k k k
8 Number of outdoor units
l h h k h h h
9 Not used
l h h k h h k
10 Not used
l h h k h k h
11 Not used
l h h k h k k
12 Not used
l h h k k h h
13 Not used
l h h k k h k
14 Contents of malfunction (the
latest)
l h h k k k h
Malfunction
code table
Refer to
page 106.
15 Contents of malfunction
(1 cycle before)
l h h k k k k
16 Contents of malfunction
(2 cycle before)
l h k h h h h
20 Contents of retry (the latest)
l h k h k h h
21 Contents of retry (1 cycle before)
l h k h k h k
22 Contents of retry (2 cycle before)
l h k h k k h
25 Not used
l h k k h h k
<Selection of setting item>
<Confirmation on setting contents>
To enter the monitor mode, push the
MODE (BS1) button when in
“Setting mode 1”.
Push the SET (BS2) button and set
the LED display to a setting item.
Push the RETURN (BS3) button to
display different data of set items.
Push the RETURN (BS3) button and
switches to the initial status of
“Monitor mode”.
*
Push the MODE (BS1) button and
returns to “Setting mode 1”.

Data such as addresses and number of units is expressed as binary numbers; the two
ways of expressing are as follows:
The No. 1 cool/heat unified address is expressed as a binary
number consisting of the lower 6 digits. (0 - 63)
In

the address is 010110 (binary number), which translates to
16 + 4 + 2 = 22 (base 10 number). In other words, the address is
22.

See the preceding page for a list of data, etc. for No. 0 - 25.
l h l h l l h
16 4 1
32 8 2