Daikin EWAQ016BAW, Руководство по обслуживанию

Страница: 14 / 228

ESIE11-05 Refrigerant Circuit
General Outline 3
2. Refrigerant Circuit
2.1 Refrigerant Circuit
2.1.1 EWYQ016BA
No. in
refrigerant
system
diagram
Symbol Name Major Function
A M1C Inverter compressor (INV)
Inverter compressor is operated on frequencies between 52Hz and 266Hz by using
the inverter, while Standard compressor is operated with commercial power supply
only.
D M1F Inverter fan
Because the system is an air heat exchange type, the fan is operated at 9-step rotation
speed by using the inverter.
E Y1E
Electronic expansion valve
(Main: EV1)
While in heating operation, PI control is applied to keep the outlet superheated degree
of air heat exchanger constant.
F Y2E
Electronic expansion valve
(Subcool: EV2)
PI control is applied to keep the outlet superheated degree of subcooling heat
exchanger constant.
G Y1S Solenoid valve (Hot gas: SVP) Used to prevent the low pressure from transient falling.
J Y2S Solenoid valve (Oil return: SVO) Used to return oil from the accumulator to the compressor.
M Y3S Four way valve Used to switch the operation mode between cooling and heating.
N S1NPH High pressure sensor Used to detect high pressure.
O S1NPL Low pressure sensor Used to detect low pressure.
P S1PH
High pressure switch (For INV
compressor)
In order to prevent the increase of high pressure when a malfunction occurs, this
switch is activated at high pressure of 4.0 MPa or more to stop the compressor
operation.
T —
Pressure regulating valve
(Liquid pipe)
This valve opens at a pressure of 4.0 MPa for prevention of pressure increase, thus
resulting in no damage of functional parts due to the increase of pressure in
transportation or storage.
V — Subcooling heat exchanger
Used to subcool liquid refrigerant from the electronic expansion valve (cooling) or
hydrobox units (heating).
W — Capillary tube
Used to return the refrigerating oil separated through the oil separator to the INV
compressor.
1 R1T Thermistor (Outdoor air: Ta) Used to detect outdoor temperature, correct discharge pipe temperature, and others.
2 R2T Thermistor (Suction pipe: Ts) Used to detect suction pipe temperature.
3 R3T
Thermistor (INV discharge
pipe: Tdi)
Used to detect discharge pipe temperature, make the temperature protection control of
compressor, and others.
4 R4T
Thermistor (Heat exchanger
deicer: Tb)
Used to detect liquid pipe temperature of air heat exchanger, determine defrosting
operation, and others.
5 R5T
Thermistor (Subcooling heat
exchanger gas pipe: Tsh)
Used to detect gas pipe temperature of gas pipe on the evaporation side of subcooling
heat exchanger, keep the superheated degree at the outlet of subcooling heat
exchanger constant, and others.
6 R6T Thermistor (Liquid pipe: Tl) Used to detect liquid pipe temperature.
7 R7T
Thermistor (Accumulator inlet:
Ts1)
Used to detect gas pipe temperature at the accumulator inlet. Keep the suction
superheated degree constant in heating operation, and others.