Daikin EKHVWQ002AAV3, Руководство по эксплуатации

Страница: 4 / 20

Operation manual
3
EKHVWQ0 E260AA1V3
Domestic hot water heat pump
4PW65343-1A – 10.2010
3. I
NTRODUCTION
3.1. This manual
This manual describes how to start up and switch off the unit, set
parameters and configure the schedule timer by means of the
controller, maintain the unit and solve operational problems.
3.2. General information
Thank you for purchasing the domestic hot water heat pump.
This unit consists out of two parts, a heat pump unit
(EKHVWQ002AAV3) and a domestic hot water tank (EKHHS). Only
this type of domestic hot water tanks can be combined with the heat
pump unit.
The domestic hot water tank is available in two sizes: 200 and 260
litre and can be mounted on top of the heat pump unit. For installation
of the domestic hot water tank on the floor next to the heat pump unit,
the dedicated EKFMHHSAA connection kit is required.
The domestic hot water tank contains an electric heater of 1.5 kW as
backup system.
4. Q
UICK START
-
UP OF THE UNIT
In this chapter the step-by-step procedure is explained for starting up
domestic water heating.
The more detailed information of how the unit must be operated is
explained in the chapter "Operating the unit" on page 4.
The quick start-up offers the user the possibility to start up the
system before reading the entire manual.
4.1. Domestic water heating operation
– quick start-up
■
Schedule timer operation
■
Continuous operation
■
Powerful operation
INFORMATION
Refer to the installation manual of the unit for installation
procedures.
Icon p is displayed
(a)
(a) To display or remove the
p
icon press the
pr
button.
▼
Schedule timer operation
▼
Push the ba button
▼ ▼
Push the Y button Push the Y button
▼ ▼
The 0 LED will light up and the
unit will start according to
default scheduled time and
default set point (see
"Schedule timer operation" on
page 7)
For changing the default
values, refer to "Setting the
schedule timer" on page 6.
The 0 LED will light up and the
unit will start according to
default scheduled time and to
auto adaptive set point
For changing the default
values, refer to "Setting the
schedule timer" on page 6.
Icon p is not displayed
(a)
(a) To display or remove the p icon press the pr button.
▼
Continuous operation
▼ ▼
Push the wbi or the
wbj button
Push the ba button
▼
Set the desired domestic hot
water temperature (e.g. 45°C)
▼ ▼
Push the Y button Push the Y button
▼ ▼
The 0 LED will light up and the
unit will start continuous
operation according to set point
The 0 LED will light up and the
unit will start continuous
operation according to auto
adaptive set point
Push the
Y
button
▼
Icon
p
is displayed or not displayed
▼
Powerful (one time water heat-up)
▼
Push the
P
button.
Refer to "Powerful domestic water heating operation (
P
)" on page 8.
▼
The
w
icon will start blinking (0.2 second interval).
Hot water will be produced rapidly.