Daikin EKHVWQ002AAV3, Руководство по эксплуатации

Страница: 5 / 20

EKHVWQ0 E260AA1V3
Domestic hot water heat pump
4PW65343-1A – 10.2010
Operation manual
4
5. O
PERATING THE UNIT
5.1. Introduction
The heat pump system is designed to provide you domestic hot water
for many years at low energy consumption.
To get the most comfort with the lowest running cost of your system, it
is very important to observe the items listed below.
Defining possible schedule timer actions for each day and filling out
the form at the very end of this manual can help you minimize the
energy consumption. Ask your installer for support if required.
■
Make sure the heat pump system works at the lowest possible
hot water temperature required to fulfill your domestic hot water
needs.
To optimize this, make sure the auto adaptive set point is used.
Refer to "Auto adaptive set point operation" on page 9.
■
Recommendation
■
If you set the set point manually, make sure the domestic hot
water is only heated up to the domestic hot water
temperature you require.
Start with a low domestic hot water temperature set point
(e.g. 45°C), and only increase if you feel that the domestic
hot water supply temperature is not sufficient.
■
Also keep hours with low electricity cost tariffs in mind.
To do this, program the domestic water heating schedule
timer. Refer to "Programming" in chapter "Programming and
consulting the schedule timer" on page 9.
5.2. Operating the digital controller
Operating the domestic hot water heat pump comes down to
operating the digital controller.
Features and functions
The digital controller is a state of the art controller that offers full
control over your installation.
Basic controller functions
The basic controller functions are:
■
Turning the unit ON/OFF.
■
Schedule timer/continuous mode
■
Selection of features:
-
quiet mode (refer to page 8),
- auto adaptive set point control (refer to page 9).
■
Temperature set point adjustment (refer to page 6).
■
Powerful mode
The digital controller supports a power cut off of maximum 2 hours.
When autorestart is enabled (see
"Field settings" in the installation
manual ) this allows a power supply shut down of 2 hours without user
intervention (e.g. benefit kWh rate power supply).
Clock function
The clock functions are:
■
24 hour real time clock.
■
Day of the week indicator.
Schedule timer function
The schedule timer function allows the user to schedule the operation
of the installation according to a daily or a weekly program.
INFORMATION
Use the auto adaptive set point to optimise.
INFORMATION
There is a default schedule timer set (refer to
"Schedule timer operation" on page 7).
CAUTION
■
Never let the digital controller get wet. This may cause
an electric shock or fire.
■
Never press the buttons of the digital controller with a
hard, pointed object. This may damage the digital
controller.
■
Never inspect or service the digital controller yourself,
ask a qualified service person to do this.
■
Do not rinse the indoor unit. This may cause electric
shock or fire.
■
Do not climb, sit or stand on top of the unit.
■
Do not place any objects or equipment on the unit top
plate.
NOTICE
■
Descriptions in this manual that apply to a specific
installation or that depend on the installed equipment,
are marked with an asterisk (*).
■
Some functions described in this manual may not be
available or should not be available. Ask your installer
or your local dealer for more information on
permission levels.