background image

This color touchscreen has the ability to receive updates to its firmware. 
Periodically firmware updates are released by the manufacturer to add features 
and/or performance enhancements. This manual was produced reflecting the 
most current firmware/feature set at the time of publication, firmware rev. 4.04. 
Firmware releases after rev. 4.04 may not be adequately depicted in this manual. 
Please refer to the appropriate website or contact your place of purchase to learn 
about changes to the thermostat after firmware release 4.04.

Under Industry Canada regulations, this radio transmitter may only operate using 
an antenna of a type and maximum (or lesser) gain approved for the transmitter 
by Industry Canada. To reduce potential radio interference to other users, the 
antenna type and its gain should be so chosen that the equivalent isotropically 
radiated power (e.i.r.p.) is not more than that necessary for successful 
communication. 

Cet appareil est conforme avec Industrie Canada, exempts de licence standard 
RSS(s). Son fonctionnement est soumis aux deux conditions suivantes: 1) ce 
dispositif ne doit pas causer d’interférences, et 2) ce dispositif doit accepter 
toute interférence, y compris les interférences qui peuvent causer un mauvais 
fonctionnement de l’appareil.

En vertu des règlements d’Industrie Canada, cet émetteur de radio ne peut 
fonctionner en utilisant une antenne d’un type et maximale (ou moins) Gain 
approuvé pour l’émetteur par Industrie Canada. Pour réduire les interférences 
radio potentielles aux autres utilisateurs , le type d’antenne et son gain doivent 
être choisis afin que la puissance isotrope rayonnée équivalente (PIRE) ne est pas 
plus de ce qui est nécessaire pour une communication réussie.

We, Daikin, declare under our sole responsibility that the device to which 
this declaration relates: Complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation. 

ii

MUH-SKYPORT2

Содержание DT4273C
































































































Отзывы: