Daikin DCS002A71, Руководство по эксплуатации

Страница: 6 / 16

5 English
5-3 Special Calculation Days (Normal Type)
Even in the case where Exclusion Periods (Normal Type) is set,
it is available to set a day when power proportional distribution
calculation is specially carried out all the day (0:00 - 24:00).
Setting is made for one year in unit of day.
For example, it is used when to carry out power proportional dis-
tribution for all the day in irregular holidays.
You can make settings on a year basis, and the month and date
that are set will be valid in the next year as well.
If settings are made for February 29 of a leap year, the same
setting will be effective on February 29 in the next leap year.
This function has a setting range up to December 2037.
6. POWER PROPORTIONAL DISTRIBU-
TION REPORT OUTPUT PROCEDURES
Here are descriptions of procedures to output monthly Power
Proportional Distribution Report.
CAUTION
Monthly Power Proportional Distribution data will not be col-
lected unless initial setup has been carried out.
[Screen Display Procedures]
Press Special Calculation
Days (Normal Type).
3
. When to end setup, press OK button.
2
. Select the day
you want to set.
∗
When the day
portion is pressed,
a is displayed.
∗
When the day
portion with a is
pressed, the
disappears and
setup is cleared.
1
. Select the month you want to set.
When << is pressed, the previous month is displayed.
When >> is pressed, the next month is displayed.
4
. When to cancel setup, press Cancel button.
(Settings remain same as previous.)
1
Insert Power Proportional Distribution Card into PCMCIA
card slot of intelligent Touch Controller.
2
Press S button in the default screen of intelligent Touch
Controller.
3
Select the Pwr Prp Dist in the System Setup menu, and
press Execute button.
4 Press Result output button in the Pwr Prp Dist menu.
5
Select either period designation or month designation.
In the case of period designation, enter calculation start
day and calculation end day.
In the case of month designation, designate the calcula-
tion day since calculation is made in unit of month.
6 Press Execute button.
7
Power Proportional Distribution Report is displayed on the
screen.
01_EM06A043_EN.fm Page 5 Monday, October 16, 2006 11:25 AM