background image

English

26

Copy mode

• A reservation made once can be copied to another day of the week. The whole reservation 

of the selected day of the week will be copied.

6:00

8:30

17:30

22:00

25°C

27°C

6:00

8:30

17:30

22:00

25°C

27°C

COPY

COPY

Program 1

Program 2 Program 3

Program 4

ON

OFF

ON

OFF

[Monday]

Program 1

Program 2 Program 3

Program 4

ON

OFF

ON

OFF

[Tuesday]

 to 

[Friday]

Setting Displays

Confi rmation

Copy

Paste

Normal

1. 

Press 

 .

2. 

Press 

 to confi rm the day of the week to be 

copied.

3. 

Press 

 .

• The whole reservation of the selected day of the week will be copied.

4. 

Press 

 to select the destination day of the 

week.

5. 

Press 

 .

• Be sure to direct the remote controller toward the indoor unit and check for a receiving 

tone and fl ashing the OPERATION lamp.

• The reservation will be copied to the selected day of the week. The whole reservation 

of the selected day of the week will be copied. 

• To continue copying the settings to other days of the week, repeat step 

4

 and step 

5

.

• The TIMER lamp lights yellow.

6. 

Press 

 to complete the setting.

• 

“ 

 ” is displayed on the LCD and WEEKLY TIMER operation is activated.

NOTE

 

Note on copy mode

•  The entire reservation of the source day of the week is copied in the copy mode.

In the case of making a reservation change for any day of the week individually after copying the content of weekly reservations, press 

 

and change the settings in the steps of setting mode. 

 Page 24

01_EN_3P297033-1.indd   26

10/12/2011   2:15:23 PM

Содержание CTXS15K2V1B













































Отзывы: