background image

English

12

 

To change the temperature setting

Press   .

• The displayed items on the LCD will change whenever either one of the buttons is 

pressed.

COOL operation

HEAT operation

AUTO operation

DRY or FAN operation

18-32°C

10-30°C

18-30°C

The temperature setting is 
not variable.

Press 

 to raise the temperature and press 

 to lower the 

temperature.

 

Operating conditions

 

Recommended temperature setting

•  For cooling: 26-28°C
•  For heating: 20-24°C

 

Tips for saving energy

•  Be careful not to cool (heat) the room too much. 

Keeping the temperature setting at a moderate level helps save energy.

•  Cover windows with a blind or a curtain.

Blocking sunlight and air from outdoors increases the cooling (heating) effect.

•  Clogged air fi lters cause ineffi cient operation and waste energy. Clean them once in about every 2 weeks.

 

Notes on the operating conditions

•  The outdoor unit consumes some power to have its electric components work even while it is not operating.

Connecting outdoor unit RXS20/25: 1-15W
Other outdoor units: 15-20W

The outdoor unit consumes 40 to 55W of power at the time of compressor preheating.

•  If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker off.
•  Use the air conditioner in the following conditions.

MODE

Operating conditions

If operation is continued out of this range

COOL

Outdoor temperature :  <2MXS> 10-46°C

<3/4/5MXS> –10-46°C
<RXS> –10-46°C

Indoor temperature : 18-32°C
Indoor humidity : 80% max.

• A safety device may work to stop the operation. 

(In multi system, it may work to stop the operation of the 
outdoor unit only.)

• Condensation may occur on the indoor unit and drip.

HEAT

Outdoor temperature :  <2/3/4/5MXS> –15-24°C

<RXS> –15-24°C

Indoor temperature : 10-30°C

• A safety device may work to stop the operation.

DRY

Outdoor temperature :  <2MXS> 10-46°C

<3/4/5MXS> –10-46°C
<RXS> –10-46°C

Indoor temperature : 18-32°C
Indoor humidity : 80% max.

• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.

•  Operation outside this humidity or temperature range may cause a safety device to disable the system.

01_EN_3P297033-1.indd   12

10/12/2011   2:15:07 PM

Содержание CTXS15K2V1B













































Отзывы: