35
Care and Cleaning
■
Titanium apatite photocatalytic air-purifying fi lter
1.
Open the front panel and
pull out the air fi lters.
Page 32
2.
Take off the titanium
apatite photocatalytic air-
purifying fi lters.
• Remove the
fi
lters from the tabs.
3.
Clean or replace the
titanium apatite
photocatalytic air-
purifying fi lters.
[Cleaning]
3-1 Vacuum dust, and soak in lukewarm
water or water for about 10 to
15 minutes if very dirty.
3-2 After washing, shake off remaining
water and let them dry in the shade.
• Do not wring out the
fi
lter to remove water from it.
[Replacement]
Remove the
fi
lter from the tabs
and prepare a new one.
• Dispose of the old
fi
lter as non-
fl
ammable waste.
4.
Insert the titanium apatite
photocatalytic air-
purifying fi lters as they
were.
• When attaching the
fi
lter, check that the
fi
lter is
properly set in the tabs.
5.
Reattach the fi lters.
Page 34
6.
Close the front panel
slowly.
Page 34
NOTE
• Operation with dirty
fi
lters:
−
cannot deodorize the air,
−
cannot clean the air,
−
results in poor heating or cooling,
−
may cause odor.
• Dispose of old
fi
lters as non-
fl
ammable waste.
• To order a titanium apatite photocatalytic air-purifying
fi
lter, contact
the dealer where you bought the air conditioner.