background image

11

AUTO · DRY · COOL · HEAT · 

FAN Operation

The air conditioner operates with the operation mode of your choice.

From the next time on, the air conditioner will operate with the same operation 

mode.

 

„

To start operation

1. 

Press 

 and select an operation mode.

• Each pressing of the button advances the mode setting in sequence.

AUTO

DRY

COOL

HEAT

FAN

2. 

Press 

 .

• 

“ 

 ” is displayed on the LCD.

• The OPERATION lamp lights green.

Display

 

„

To stop operation

Press 

 again.

• 

“ 

 ” is no longer displayed on the LCD.

•  The OPERATION lamp goes off.

NOTE

MODE

Notes on each operation mode

HEAT

• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in lower outdoor 

temperatures. If the heating effect is insufficient, it is recommended to use another heating appliance in combination with the air conditioner.

• The heat pump system heats the room by circulating hot air around all parts of the room.  After the start of HEAT operation, it takes 

some time before the room gets warmer.

• In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity.  In that case, the system switches into 

defrosting operation to take away the frost.

• During defrosting operation, hot air does not flow out of indoor unit.

COOL

• This air conditioner cools the room by releasing the heat in the room outside. Therefore, the cooling performance of the air 

conditioner may be degraded if the outdoor temperature is high.

DRY

• The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically 

controls temperature and airflow rate, so manual adjustment of these functions is unavailable.

AUTO

• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the room and outside 

temperatures and starts the operation.

• The system automatically reselects setting at a regular interval to bring the room temperature to user-setting level.

FAN

• This mode is valid for fan only.

01_EN_3P297290-3C.indd   11

11/17/2015   10:27:15

Содержание CDXS24LVJU































Отзывы: