background image

3

Safety Considerations

Read these 

Safety Considerations for Operations

 carefully 

before operating an air conditioner or heat pump.

 

Make sure that the unit operates properly during the startup 
operation. Instruct the user on how to operate and maintain the 
unit. 

 

Inform users that they should store this operation manual with 
the installation manual for future reference.

 

Meanings of 

DANGER

WARNING

CAUTION

, and 

NOTE

 

Symbols:

 DANGER  ...........

Indicates an imminently hazardous 
situation which, if not avoided, will 
result in death or serious injury.

 WARNING  .........

Indicates a potentially hazardous 
situation which, if not avoided, could 
result in death or serious injury.

 CAUTION  ..........

Indicates a potentially hazardous 
situation which, if not avoided, may 
result in minor or moderate injury. 
It may also be used to alert against 
unsafe practices.

 NOTE  ................

Indicates situations that may result 
in equipment or property-damage 
accidents only.

  

 DANGER 

•  Do not install the unit in an area where flammable materials 

are present due to risk of explosion resulting in serious 
injury or death.

•  Any abnormalities in the operation of the air conditioner or 

heat pump, such as smoke or fire, could result in severe 
injury or death. Turn off the power and contact your dealer 
immediately.

•  Refrigerant gas may produce toxic gas if it comes into contact 

with fire, such as from a fan heater, stove, or cooking device. 
Exposure to this gas could cause severe injury or death.

•  For refrigerant leakage, consult your dealer. 

 

Refrigerant gas is heavier than air and replaces oxygen. 
A massive leak could lead to oxygen depletion, especially 
in basements, and an asphyxiation hazard could occur 
leading to serious injury or death.

•  If equipment utilizing a burner is used in the same room 

as the air conditioner or heat pump, there is the danger 
of oxygen deficiency which could lead to an asphyxiation 
hazard resulting in serious injury or death. Be sure to 
ventilate the room sufficiently to avoid this hazard.

•  Safely dispose of the packing materials. Packing materials, 

such as nails and other metal or wooden parts, may cause 
stabs or other injuries.

•  Tear apart and throw away plastic packaging bags so that 

children will not play with them. Children playing with plastic 
bags face the danger of death by suffocation.

  

 WARNING 

•  Contact your dealer for repair and maintenance.

 

Improper repair and maintenance may result in water 
leakage, electric shock, and fire. Only use accessories 
made by Daikin that are specifically designed for use with 
the equipment and have them installed by a professional.

•  Contact your dealer to move and reinstall the air conditioner 

or heat pump. Incomplete installation may result in water 
leakage, electric shock, and fire.

•  Never let the indoor unit or the remote controller get wet. 

Water can cause an electric shock or a fire.

•  Never use flammable spray such as hair spray, lacquer, or 

paint near the unit. Flammable spray may cause a fire.

•  When a fuse blows out, never replace it with one of 

incorrect ampere ratings or different wires. Always replace 
any blown fuse with a fuse of the same specification.

•  Never remove the fan guard of the unit. A fan rotating at 

high speed without the fan guard is very dangerous.

•  Never inspect or service the unit by yourself. Contact a 

qualified service person to perform this work.

•  Turn off all electrical power before doing any maintenance 

to avoid the risk of serious electric shock; never sprinkle or 
spill water or liquids on the unit.

•  Do not touch the switch with wet fingers. Touching a switch 

with wet fingers can cause electric shock.

•  Do not allow children to play on or around the unit to 

prevent injury. 

•  The heat exchanger fins are sharp enough to cut. To avoid 

injury wear gloves or cover the fins while working around 
them.

•  Do not put a finger or other objects into the air inlet or air 

outlet. The fan is rotating at high speed and will cause injury.

•  Check the unit foundation for damage on a continuous 

basis, especially if it has been in use for a long time. If left in 
a damaged condition the unit may fall and cause injury.

•  Placing a flower vase or other containers with water or 

other liquids on the unit could cause a shock or fire if a spill 
occurs.

•  Do not touch the air outlet or horizontal blades while the 

swing flap is in operation because fingers could get caught 
and injured.

•  Never touch the internal parts of the controller. Do not 

remove the front panel because some parts inside are 
dangerous to touch. To check and adjust internal parts, 
contact your dealer.

  

 CAUTION 

•  Do not use the air conditioner or heat pump for any other 

purposes other than comfort cooling or heating. 

 

Do not use the unit for cooling precision instruments, food, 
plants, animals or works of art.

01_EN_3P297290-3C.indd   3

11/17/2015   10:27:12

Содержание CDXS24LVJU































Отзывы: