Remote Controller (Wireless Type)
OH08-1
64
Control Systems
2.3.5
Installation
Safety Precautions
Please read these “SAFETY PRECAUTIONS” carefully before installing air conditioning unit and be sure to
install it correctly.
After completing installation, conduct a trial operation to check for faults and explain to the customer how to
operate the air conditioner and take care of it with the aid of the operation manual. Ask the customer to
store the installation manual along with the operation manual for future reference.
Meaning of CAUTION notices
CAUTION
Failure to observe these instructions properly may result in property damage or personal injury, which may
be serious depending on the circumstances.
CAUTION
z
Refer also to the installation manual attached to the indoor unit and the installation manual attached to
the decoration panel.
z
Confirm that following conditions are satisfied prior to installation.
z
Ensure that noting interrupts the operation of the wireless remote controller. (Ensure that there is
neither a source of light nor fluorescent lamp near the receiver. Also, ensure that the receiver is not
exposed of direct sun light.)
z
Ensure that the operaiton display lamp and other indicators are easy to see.
z
The installation position of this kit is 1 position of the decoration panel. Therefore, confirm that its
position is set so that the single form the wireless remote controller can be easily transmitted and its
display can be easily seen.
z
If both this kit and fresh air intake kit are installed, only one duct chamber shall be used. Refer to the
installation manual of the fresh air intake kit (optional hand book).
Before Installation
(1) Accessories
Check if the following accessories are included with your unit.
(2) Note to the Installer
z
Be sure to instruct the customer how to properly operate the system showing him/her the attached
operation manual.
Name
Receiver
Wireless remote
controller
Transmission
Remote controller
holder
Screw for installing
transmission
Screw for installing
remote controller
holder
Quantity
1 set
1 pc.
1 set
1 pc.
2 pcs.
2 pcs.
Shape
Name
Clamp
Dry cell battery
LR03 (AM4)
Unit No. label
Field setting label
Operation manual
Installation manual
Quantity
1 pc.
2 pcs.
1 pc.
1 pc.
1 pc.
1 pc.
Shape