Daikin BRC1E73, Руководство по установке, Страница: 18 / 68

16 English
7-4
Press On/Off button within 10 sec-
onds, and the test operation starts.
Monitor the operation of the indoor unit
for a minimum of 10 minutes. During
test operation, the indoor unit will
continue to cool regardless of the
temperature setpoint and room
temperature.
Note) In the case of above-men-
∗
tioned procedures
7-3
and
7-4
in reverse order, test
operation can start as well.
Press
7-5
Menu/OK button in the basic
screen. Main menu is displayed.
In the case of a model having air fl ow
7-6
direction function, select
Air fl ow Direction in the main menu
and check that air fl ow direction is
actuated according to the setting.
For operation of air
fl ow direction
setting, see the operation manual.
After the operation of air fl ow direction
7-7
is con fi rmed, press Menu/OK button.
Basic screen returns.
Press and hold
7-8
Cancel button for
4 seconds or longer in the basic
screen.
Service settings menu is displayed.
Select
7-9
Test Operation in the service
settings menu, and press Menu/OK
button. Basic screen returns and
normal operation is conducted.
Note) The test operation will automat- ∗
ically fi nish in 30 minutes.
Check the functions according to the
7-10
operation manual.
When the decorative panel is not
7-11
installed, shut off the power supply
after the test operation
fi nishes.
If construction activities are planned within ●
the space following the test operation
procedure, recommend to the customer
that the indoor unit is not operated to
prevent contamination from paints, drywall
dust and other airborne materials.
4 7-
5 7-
Set temperature
28
°C
Cool
Test Operation
Press On/Off button
(within 10 seconds).
Press Menu/OK button.
<Main menu screen>
6 7-
Setting
Main Menu
Airflow Direction
Individual Airflow Direction
Ventilation
Schedule
Off Timer
Celsius / Fahrenheit
1/3
Press Menu/OK button.
7 7-
Setting
Airflow Direction
Swing
Change the air fl ow
direction by using
(Up/Down) button.
Press Menu/OK button.
8 7-
Set temperature
28
°C
Cool
Test Operation
Press and hold Cancel
button for 4 seconds or
longer while the backlight
is on.
9 7-
Setting
1/3 Service Settings
Test Operation
Maintenance Contact
Field Settings
Energy Saving Options
Prohibit Function
Min Setpoints Differential
Press Menu/OK button.
<Basic screen>
01_EN_3P243521-7L.indd 16 01_EN_3P243521-7L.indd 16 10/31/2014 4:56:44 PM 10/31/2014 4:56:44 PM