Daikin BRC1E62, Руководство по установке

Страница: 5 / 28

4
2. Accessories
The following accessories are included.
Wood screw Small screw Clamp
Operation
manual
Installation
manual
Wiring retainer
(M3.5×16) (M4×16)
(2 pcs.) (2 pcs.) (1 pc.) (1 pc.) (1 pc.) (1 pc.)
3. Remote controller installation procedure
3-1 Determine where to install the remote controller.
Make sure to follow "
1. Safety Precautions
" when determining the location.
3-2 Make a wiring through hole on the wall if the wires are taken
out from the back side.
Set the center of the wall hole
to the center of the wiring
through hole on the controller
lower case when making the
hole.
Ø8-10
External view of the remote controller
Through
hole
Ø8-10
Lower case
through hole
48.5
40
3-3 Remove upper case.
Insert a screwdriver in the recess of lower case to remove the upper case (2 points).
Upper case
Lower case
Screwdriver
Insert and twist the screwdriver
lightly for removal.
Remote controller Printed Circuit
Board is installed on the upper case.
Take care not to damage the Printed
Circuit Board with the screwdriver.
Take care that dust or moisture does
not touch the Printed Circuit Board.
If the hole size is too large or the location is not
proper, the hole may come out from the controller.
CAUTION