BRC1D71
Remote controller
3P166742-2
Installation manual
1
The kit includes the following parts:
1. Remove the upper part of remote
controller
(Refer to figure 1)
Insert a minus screwdriver into the slots (1) in the
lower part of the remote controller (2 places), and
remove the upper part of the remote controller.
2. Fasten the remote controller
(Refer
to figure 2)
For the field supplied switch box, use optional accessory
KJB111A or KJB211A.
BRC1D71
Remote controller
Installation manual
READ THIS MANUAL ATTENTIVELY
BEFORE STARTING UP THE UNIT. DO
NOT THROW IT AWAY. KEEP IT IN YOUR
FILES FOR FUTURE REFERENCE.
IMPROPER INSTALLATION OR
ATTACHMENT OF EQUIPMENT OR
ACCESSORIES COULD RESULT IN
ELECTRIC SHOCK, SHORT-CIRCUIT,
LEAKS, FIRE OR OTHER DAMAGE TO
THE EQUIPMENT. BE SURE ONLY TO
USE ACCESSORIES MADE BY DAIKIN
WHICH ARE SPECIFICALLY DESIGNED
FOR THE USE WITH THE EQUIPMENT
AND HAVE THEM INSTALLED BY A
PROFESSIONAL.
IF UNSURE OF INSTALLATION PROCE-
DURES OR USE, ALWAYS CONTACT
YOUR DEALER FOR ADVICE AND
INFORMATION.
Remote controller
Wood screws
Wall plugs
Machine screws
The PC board is mounted in the upper part
of the remote controller. Be careful not to
damage the board with the minus
screwdriver.
1
for exposed mounting, fasten with the two
included wood screws (Ø4x30) and plugs.
2
for flush-mounting, fasten with the two
included machine screws (M4x16).
NOTE
Choose the flattest place possible for the
mounting surface. Be careful not to
distort the shape of the lower part of the
remote controller by overtightening the
mounting screws.
✦✷✤✩✩✪✧✥-✥_✲N.❇m ✷❂❈❆ ✤ ✾❆❅n❆s❅❂❖, O❄❏o❃❆❍ 5, ✥✣✣5 ✩:✥✣ ✷M
