Daikin ATXB25C2V1B, Руководство по эксплуатации

Страница: 14 / 32

12
Adjusting the Airflow Direction
„
To adjust the louvers (vertical
blades)
Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-side
blades.)
• When the unit is installed in the corner of a room, the
direction of the louvers should be facing away from the
wall.
If they face the wall, the wall will block off the wind,
causing the cooling (or heating) efficiency to drop.
CAUTION
• Always use a remote controller to adjust the angles of the flap. If you attempt to move the flap
and louvers forcibly with hand when they are swinging, the mechanism may be broken.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
NOTE
„
Notes on the angles of the flap
• The flap swinging range depends on the
operation. (See the figure.)
• If the air conditioner is operated in HEAT
or DRY operation with the flap kept
stopped in the downward direction, the
flap will automatically start operating in
approximately an hour in order to prevent
dew condensation.
In DRY operation or COOL operation
45°
5°
0°
COMFORT AIRFLOW
Upper limit
Lower limit
Stop operation
In HEAT operation
15°
45°
50°
0°
Upper limit
Lower limit
Stop operation
COMFORT AIRFLOW
In FAN operation
45°
5°
0°
Upper limit
Lower limit
Stop operation