Si041351ED
PCBs
Removal Procedure
11
9
10
Unfasten the 2 hooks
and remove the signal
receiver PCB.
Disconnect the
connector [S48].
[S48]: to control PCB
2. Remove the
INTELLIGENT EYE
sensor PCB.
Some models have no
INTELLIGENT EYE sensor
PCB.
1
Unfasten the 4 hooks
and remove the
INTELLIGENT EYE
sensor ASSY.
2
Remove the sensor
from the shield plate.
When reassembling, set the
sensor at the position where
it clicks. Otherwise, the
sensor is not completely set.
3
4
5
Remove the shield
plate by unfastening the
2 hooks.
Disconnect the
connector [S36].
Remove the
INTELLIGENT EYE
sensor PCB.
[S36]: to control PCB
Step
Procedure
Points
(R18737)
Signal receiver PCB
[S48]
(R9523)
Hook
Hook
INTELLIGENT EYE
sensor ASSY
(R9525)
Sensor
Shield plate
(R18893)
Shield plate (rear)
Hook
INTELLIGENT EYE
sensor PCB
[S36]