![background image](http://html.mh-extra.com/html/daikin/arxs50c2vmb/arxs50c2vmb_service-manual_501344141.webp)
Troubleshooting
SiEN04-306D
132
Service Diagnosis
4.18 Radiation Fin Temperature Rise
remote control
Display
L4
Method of
Malfunction
Detection
A radiation fin temperature rise is detected by checking the radiation fin thermistor with the
compressor on.
Malfunction
Decision
Conditions
If the radiation fin temperature with the compressor on is above 90°C,
If a radiation fin temperature rise takes place 4 times successively, the system will be shut
down.
The error counter will reset itself if this or any other error does not occur during the following
60-minute compressor running time (total time).
Supposed
Causes
Fin temperature rise due to defective outdoor unit fan
Fin temperature rise due to short-circuit
Fin thermistor defective
Connector in poor contact
Outdoor unit PCB defective
Содержание ARXS50C2VMB
