Daikin Altherma F, Руководство по установке для специалистов

Страница: 48 / 296

6 | Application guidelines
Installer reference guide
48
EPRA14~W1 + ETV23EA6V
Daikin Altherma 3 H HT F
4P644738-1 – 2021.02
Configuration
Setting Value
Unit temperature control:
▪ #: [2.9]
▪ Code: [C-07]
2 ( Room thermostat ): Unit operation
is decided based on the ambient
temperature of the dedicated Human
Comfort Interface.
Note:
▪ Main room = dedicated Human
Comfort Interface used as room
thermostat functionality
▪ Other rooms = external room
thermostat functionality
Number of water temperature zones:
▪ #: [4.4]
▪ Code: [7-02]
1 (
Dual zone
): Main + additional
In case of heat pump convectors:
External room thermostat for the
additional zone:
▪ #: [3.A]
▪ Code: [C-06]
1 ( 1 contact ): When the used
external room thermostat or heat pump
convector can only send a thermo ON/
OFF condition. No separation between
heating or cooling demand.
Bizone kit installed :
▪ #: [9.P.1]
▪ Code: [E-0B]
2 ( Yes ) : A bizone kit is installed in order
to add an additional temperature zone.
Bizone system type :
▪ #: [9.P.2]
▪ Code: [E-0C]
0 ( Without hydraulic
separator / no direct pump )
1 (
With hydraulic separator /
no direct pump )
2 ( With hydraulic separator /
with direct pump )
(See 3 system variations described
above)
Shut-off valve output Set to follow the thermo demand of the
main zone.
Shut-off valve If the main zone must be shut off during
cooling mode to prevent condensation
on the floor, set it accordingly.
See "Bizone kit" [
4
217] for more information on configuration of the bizone kit.
Benefits
▪ Comfort.
- The smart room thermostat functionality can decrease or increase the desired
leaving water temperature based on the actual room temperature
(modulation).
- The combination of the two heat emitter systems provides the excellent
heating comfort of the underfloor heating, and the excellent cooling comfort of
the heat pump convectors.